Some of the features and benefits of the Sartek SafeAire Filter:

The Sartek SafeAire Filter was tested by a certified laboratory, installed on a PTAC running at 350CFM. Our bare filter (no prefilter or other filters) eliminated 99.9% of a test virus PHI X174, in a 1000 cubic foot chamber, in under 2 hours. The Sartek SafeAire filter performed this task with less than a 4% reduction of airflow!

Tremendous system energy cost reduction, typically up to a 10 times reduction in system power requirements over HEPA filters, for the same air volume filtered.

Adaptable to existing systems without any filter holder modification.

A truly washable and easily maintained filter that will remain effective throughout its’ life, without any serious reduction of effectiveness.

Environmentally friendly, virtually eliminates the need to dispose of filters in a land fill

Safe handling, viruses, microbe and bacteria are neutralized after brief contact with the filter, therefore the potential of human contamination is virtually eliminated.

Very short period for return on investment.  The Safeaire system typically costs the same a 1 HEPA filter and the Sartek SafeAire system has a Lifetime Warranty for material and workmanship.

No electrician required, the SafeAire control module can use the 24VAC of your unit, 12VDC or even a battery pack. 

Non-toxic materials, the SafeAire system uses materials that are safe for humans and animals but toxic to viruses, bacteria and microbes.

The filter system has no moving parts and the effectiveness of the antiviral/antimicrobial material does not diminish over time.

The SafeAire system can be used in conjunction with other filter media such as UVC, Activated Carbon, MERV filters to create the most effective system for the facility being protected.